New Page

Supplies: DiamondCRETE, embroidery hoop, stoppers, contact paper, glass/novelty items, chime parts, and DiamondSEAL.

Wind Chime

w19flyer.jpg (16920 bytes)

	Use a Hobby knife to cut the inner circle of an embroidery hoop (wood or plastic).
	Lay out pattern upside down, if one is to be used. Secure pattern with tape.
	Lay clear contact paper with the adhesive side up directly over the pattern if one is used. Secure with tape.

w18flyer.jpg (8098 bytes)

To add beauty and protection to your project, seal with DiamondSEAL after 30 days.

Mix DiamondCRETE according to manufacturers specifications using an electric mixer.
Pour gently into the center of the ring.
Gently tap the work surface, which the project is laid out on. This will eliminate any bubbles.

	Place glass pieces upside down on the adhesive side of the contact paper according to pattern diagram.	After allowing DiamondCRETE to slightly harden, drop your favorite marbles, beads, gems, rocks, shells, beach glass, etc. into the top surface to create a fun and unique design.
	Apply Petroleum Jelly to the inside of the inner circle of the embroidery hoop.	After total hardening of the wind chime project, approximately one hour, gently remove the stoppers.
	Attach both embroidery hoops together prior to placing the ring on the contact paper leaving sufficient room around the glass. Press hoop firmly onto contact paper to prevent leaking.	Remove project from contact paper, ring and all.
	Apply ample Petroleum Jelly to only the side surfaces of the craft cork stoppers (size #6 [1" x 3/4"] or rubber stoppers (available at a hardware store) making sure to fill in any and all indentations.	Perform final cleanup of any unwanted leakage over glass by using your Hobby knife to scratch and pick off the residue.
	Carefully place stoppers on to contact paper leaving approximately 1/4" space between the embroidery hoop and the side of the stopper. Strategically place stoppers for desired number of chimes and one for hanging. Press firmly to contact paper to prevent leakage.	Remove the embroidery hoop. Using a variety of craft supplies you can create your own unique chimes. Items which may be used include bells, glass, aluminum rods, large rings, copper pipe, silverware, etc.